Popular
-
NESTY MH200 Wireless Headphones & Speaker 2in1
R659.00
-
NESTY RX28 THUNDAR Wireless Speaker
R499.00
-
NESTY BM110 BOOMBOX Wireless Speaker
R4,199.00
-
NESTY BM103 GO Series Wireless Speaker
R339.00
-
NESTY MM301 ORBIT Wireless Speaker
R3,299.00
T6 Mini Jump Starter(Including Delivery)
Original price was: R1,499.00.R899.00Current price is: R899.00.
Features:
– Emergency Car Started In the fully charged state it can start the car more than 20 times
– Special ignition clamp
– Emergency start most types of vehicles
– Compact easy to carry
– Driving essential LED Emergency Lightning Excellent equipment for camping and outdoor activities
– Special durable plastic
– Shell and shock absorption design
– Imported high brightness
– LED 100m high
– Remote visible distance with a variety of lighting modes
– Flashlight
– Strobe
– SOS distress signals
– Switching is simple
– Continuous lighting for up to 120 hours
Life Cycle:
– Above 3000 times
– The Car Boot Port: 12v
– USB Port 5V 2.1/1A
– Starting Current 200A
– Peak Current 400A(3S)
– Size 165 x 75 x 30mm
– LED Life 100.000H
– LED Saving 1W
– LED Lumen 86LM
– Operating Temperature 0 – 85 Degrees
– Fully Charge Time 6 Hours
What’s in the box:
1 x Power Bank
1 x Wall Power adapter
1 x Cigarette lighter charging adapter
1 x Four-in-one mobile phone adapter cable
1 x Set of startup Clamp Wire
1 x User manual
20 in stock
Vendor Information
- Address:
- No ratings found yet!
-
Quick View
Robot Bodyguard (Including Delivery.)
Original price was: R232.00.R135.00Current price is: R135.00.Add to cartProduct Features
- Convenient
- Portable
- 2 colours
- Password setting and finger print detection
- Handle on top
- Changeable Code, Electronic Sounds, Coin Slot
- Battery Powered (batteries not included)
-
Quick View
Solar COB Work light JY-819
Original price was: R299.00.R129.00Current price is: R129.00.Add to cartDescription
- Ideal for: Camping,Picnic,Hiking,Hunting,Traveling,Fishing,Car Repairing,Outdoor Party,Emergency,Lighting For House,Kitchen,Underground Parking,Hotel,Warehouse,Club And So On
- With Powerbank Function: Charge Your Mobile Phones
- Micro USB Charging
-
Quick View
KONNWEI KW808 EOBD / OBDII Car Auto Diagnostic Scan Tools CAN Code Reader Scanner Auto Scan Adapter Scan Tool
Original price was: R893.00.R619.00Current price is: R619.00.Add to cart1. The KW808 OBDII/EOBD Code Reader supports all nine OBDII test modes on all OBDII EOBD compliant vehicles to enable technicians and home users to accurately diagnose even the toughest problems. Sophisticated yet easy-to-use, this hand-held scanning tool enables fast and easy access to engine based EOBD Fault codes, The CAN enabled tool gives clear, concise DTC definitions on its large back-lit LCD screen retrieves generic P0, P2 and P3 and U0 codes for engine emissions and also picks up manufacturer specific P1, P3 and U1 codes, Turns off MIL light, Stores freeze frame data for later evaluation and will also display monitor and I/M readiness status.
2. Features & Functions:
Works on all 1996 and later OBDII compliant US, European and Asian vehicles
Easily determines the cause of the Check Engine Light ( MIL)
Retrieves generic (P0, P2, P3, and U0) and manufacturer specific (P1, P3, and U1) codes
Turns off Check Engine Light (MIL), clears codes and resets monitors
Displays DTC definitions on unit screen
Views freeze frame data
Displays monitor and I/M readiness status (emissions)
Identifies pending codes
Reads live PCM datastream
Displays live O2 sensor test data
Graphs data C (1996 and newer)
Reads, stores & playbacks live sensor data
Memory/battery backup for off-vehicle data review and analysis
Multilingual menu:— English, Spanish, French,German
Performs modules present test
Retrieves vehicle information (VIN, CIN and CVN)
Supports CAN (Controller Area Network) and all other current
OBD-II protocols
Built-in OBD-II DTC lookup library
Large easy-to-read backlit LCD screen
Software upgradeable via internet
Prints data via PC -
Quick View
2 Shocks USB Joystick (Shipping Included)
Original price was: R279.00.R169.00Current price is: R169.00.Add to cart- USB version 1.0/1.1/2.0/3.0, fully plug and play supported
- Provide 4 axis, 2 Analog and 12 buttons with vibration
- Turbo and slow motion functions
- Can be switched between digital mode and analog mode
- Built with 2 vibration engines, dual vibration inside
- Fully compatible with Windows OS, MAC OS
- Easy To Carry – Small, Light Weight Convenient To Use
What’s in the box
1 x Gamepad -
Quick View
Solar Induction Lamp LED Solar Wall Light Outdoor Lighting Motion Sensor
Original price was: R399.00.R199.00Current price is: R199.00.Add to cartFeatures:
– Electrical charge solar powered
– Energy Saving
– Human induction motion sensor
– Solar charging
– Can detect movements from 3-5m up to 120 angle
– Led Quantity: 30
– Battery:3.7V:1200mah
– Charging Time: 5-6h
– Waterproof grade: IP65
– Detection Distance: 120 degrees x 5m
– Brightness: 800lmnWhat’s in the box
1xSolar Lamp -
Quick View
KW206 Auto Onboard Computer Gauge and OBII Engine Scanner
R2,214.00Add to cartFeatures:
– Kw206 is an OBDII EOBD Scan code reader that supports all 12V vehicles to enable technicians to accurately diagnose even the toughest problems, to read and delete general fault codes.
– The HUD(Head-up-display) integrates the speedometer, engine temperature gauge, oil thermometer, boost gauge, fuel consumption meter in one, and shows these data on the windshield for convenience.
– Kw206 can display instantaneous and average fuel consumption.
– Kw206 supports vehicle key data alarm function (voltage, water temperature, speed, etc.)
– There are multiple dedicated systems that can be switched freely.Koonwei kw206 parameter
– Colour: Black
– 3.5 inch TFT color screen
– Supported languages: Chinese, English, Russian, Spanish
– Support Agreement: Five major agreements
– Application: 12V vehicle
– Product size: 13 x 8.4 x 2.58 cm
– Product weight: 300 gramsWhat’s in the box
1 x Konnwei KW206 OBDII scanner
1 x USB cable
1 x 16 pin connector
1 x User manual
1 x Colour box
Related products
-
Quick View
KONNWEI KW808 EOBD / OBDII Car Auto Diagnostic Scan Tools CAN Code Reader Scanner Auto Scan Adapter Scan Tool
Original price was: R893.00.R619.00Current price is: R619.00.Add to cart1. The KW808 OBDII/EOBD Code Reader supports all nine OBDII test modes on all OBDII EOBD compliant vehicles to enable technicians and home users to accurately diagnose even the toughest problems. Sophisticated yet easy-to-use, this hand-held scanning tool enables fast and easy access to engine based EOBD Fault codes, The CAN enabled tool gives clear, concise DTC definitions on its large back-lit LCD screen retrieves generic P0, P2 and P3 and U0 codes for engine emissions and also picks up manufacturer specific P1, P3 and U1 codes, Turns off MIL light, Stores freeze frame data for later evaluation and will also display monitor and I/M readiness status.
2. Features & Functions:
Works on all 1996 and later OBDII compliant US, European and Asian vehicles
Easily determines the cause of the Check Engine Light ( MIL)
Retrieves generic (P0, P2, P3, and U0) and manufacturer specific (P1, P3, and U1) codes
Turns off Check Engine Light (MIL), clears codes and resets monitors
Displays DTC definitions on unit screen
Views freeze frame data
Displays monitor and I/M readiness status (emissions)
Identifies pending codes
Reads live PCM datastream
Displays live O2 sensor test data
Graphs data C (1996 and newer)
Reads, stores & playbacks live sensor data
Memory/battery backup for off-vehicle data review and analysis
Multilingual menu:— English, Spanish, French,German
Performs modules present test
Retrieves vehicle information (VIN, CIN and CVN)
Supports CAN (Controller Area Network) and all other current
OBD-II protocols
Built-in OBD-II DTC lookup library
Large easy-to-read backlit LCD screen
Software upgradeable via internet
Prints data via PC -
Quick View
KONNWEI KW310 Professional OBD2 Scanner and KONNWEI KW350 Full System OBD2 Diagnostic Scanner
Original price was: R599.00.R399.00Current price is: R399.00.Add to cartFeatures
-Reading Codes Show the detailed description of the Diagnostic Trouble Code (DTCs)
– Erasing Codes & Reset Turns off Check Engine Light (MIL), clears codes, and resets monitors.
– Data Stream Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
– I/M Readiness Status Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
– View Freeze Frame Data Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
– Read Vehicle Information Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
– Turn off the engine warning light
– Smoke emission Check
-.Engine EPC Check
– Work on ALL 12V OBDII certified vehicles.
– Hybrid and electric vehicles are not supported.What’s in the box
1 x KW310 OBD2 Automotive Diagnostic Scanner Tool -
Quick View
KONNWEI KW210 12V Car Battery Tester Auto Battery Analyzer 100 to 2000CCA Cranking Automotive Diagnostic Tool
Original price was: R999.00.R699.00Current price is: R699.00.Add to cartProduct Description:
KONNWEI KW210 is the newest battery tester upgraded from the old classic backlit tester in the market, aiming at check battery,health fast and accurately, as well as check the alternator working status. It’s a professional vehicle diagnostic tool for checking your battery system issues by using the graphing voltage monitoring tool, with its color screen and unique pattern design, life time free update service, the KONNWEI KW210is a perfect battery testing tool for your job and the family.Specification:
Brand: KONNWEI
Model Number: KW210
Display: Color TFT LCD Screen.
System Voltage: 12 V
Input Voltage Range: 8V-16V
Power Requirements: No internal batteries required, Power on when hooked up during testing
Operating Temperatuer: 0℃-50℃.
Storage Temperature: -20℃-70℃.(-4 to 158 ℉)
Power: 9 to 16 V provided via vehicle
Supported Battery type: CCA, ICE, EN, DIN, CA, BCI, MCA, SAE, GB, JIS Device
Dimensions: 16.5cm x 6cm x 2.5cmWeight: 450g
Feature:
1.Fast and smooth running speed with STM32 chip set hardware.
2.Identify battery status Good or Replace.
3.Check Battery Capacity – Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating.
4.Check Internal resistance value (m) .
5.Display Life in percentage (%) .
6.Battery Cranking Test, load test Battery Charging Test, Ripple Test.
7.Graphing voltage real time monitoring.
8.Test results storage and review.
9.Print test results and battery report on PC.
10.Life time upgrade free.Support Languages:
English, Japanese, French, German, Russian, Dutch, Spanish, Portuguese, Polish, Italian.Application:
Use to test a wide range of 12V batteries (Starting{SLI}, Deep Cycled and Marine) of Wet(Flooded), VRLA or Maintenance Free (MF), Sealed Maintenance Free (SMF), Absorption Glass Mat(AGM), EFB and GEL Cell.
The major battery standards CA, CCA, BCL, MCA, JIS, SAE, EN, GB, DIN and IEC are supported.Measure Standard:
CCA:100-2000.
BCI:100-2000.
CA:100-2000.
MCA:100-2000.
JIS:26A17-24SH52.
DIN:100-1400.
IEC:100-1400.
EN:100-2000.
SAE:100-2000.
GB:100-1400.Package included:
1 x KW210 Battery Tester Unit
1 x USB Cable For Upgrade And Print
1 x Box
1 x User Manual -
Quick View
Smart Sensor S5 Car Wireless Charger( Including Delivery.)
Original price was: R335.00.R199.99Current price is: R199.99.Add to cartFeatures.
Smart Sensor S5 Wireless Charger Car Mount adopts high charging efficiency, upgraded independent coil, Qi wireless fast charging and provides faster charge than most wireless car charger mounts in the market.
High quality compared with a windshield or a dashboard mount, the air vent mount is much easier for you to reach the phone in your car and causes less distraction during driving. No Tools Needed.• Qi-certified: Supports all QI enabled devices. Devices that do not support wireless charging will need to be paired with a QI compliant wireless charging receiver (not included).
• Input: 5V/2A, 9V/1.67A
• Output: Automatic identification 10W, 7.5W, and 5W
• Charging power: 110K-205K h/z
• Scratch resistant material
• Fast charge: This is one of the fastest wireless chargers on the market
• Strong and stable mount and clamp
• Air-vent mount design for much easier installation compared to windshield or dashboard mount. Absolutely no tools needed. Can easily be installed into any car
• Smart infrared sensors: Simply wave our hand or phone in front of the infrared sensor, both arms will open wide to hold our cellphones automatically
• Compatibility: Works with all Qi wireless compatible phones
Product Showcase
Reviews
There are no reviews yet.