Welcome to Deal4Royals
Sale!

KONNWEI KW310 Professional OBD2 Scanner and KONNWEI KW350 Full System OBD2 Diagnostic Scanner

Original price was: R599.00.Current price is: R399.00.

Features

-Reading Codes Show the detailed description of the Diagnostic Trouble Code (DTCs)
– Erasing Codes & Reset Turns off Check Engine Light (MIL), clears codes, and resets monitors.
– Data Stream Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
– I/M Readiness Status Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
– View Freeze Frame Data Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
– Read Vehicle Information Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
– Turn off the engine warning light
– Smoke emission Check
-.Engine EPC Check
– Work on ALL 12V OBDII certified vehicles.
– Hybrid and electric vehicles are not supported.

What’s in the box
1 x KW310 OBD2 Automotive Diagnostic Scanner Tool

20 in stock

Compare

Reviews

There are no reviews yet.

Be the first to review “KONNWEI KW310 Professional OBD2 Scanner and KONNWEI KW350 Full System OBD2 Diagnostic Scanner”

Your email address will not be published. Required fields are marked *

Vendor Information

  • Address:
  • No ratings found yet!
  • Smart Sensor S5 Car Wireless Charger( Including Delivery.)

    Original price was: R335.00.Current price is: R199.99.

    Features.

    Smart Sensor S5 Wireless Charger Car Mount adopts high charging efficiency, upgraded independent coil, Qi wireless fast charging and provides faster charge than most wireless car charger mounts in the market.
    High quality compared with a windshield or a dashboard mount, the air vent mount is much easier for you to reach the phone in your car and causes less distraction during driving. No Tools Needed.

    • Qi-certified: Supports all QI enabled devices. Devices that do not support wireless charging will need to be paired with a QI compliant wireless charging receiver (not included).
    • Input: 5V/2A, 9V/1.67A
    • Output: Automatic identification 10W, 7.5W, and 5W
    • Charging power: 110K-205K h/z
    • Scratch resistant material
    • Fast charge: This is one of the fastest wireless chargers on the market
    • Strong and stable mount and clamp
    • Air-vent mount design for much easier installation compared to windshield or dashboard mount. Absolutely no tools needed. Can easily be installed into any car
    • Smart infrared sensors: Simply wave our hand or phone in front of the infrared sensor, both arms will open wide to hold our cellphones automatically
    • Compatibility: Works with all Qi wireless compatible phones

    Add to cart
    Quick View
  • KW206 Auto Onboard Computer Gauge and OBII Engine Scanner

    R2,214.00

    Features:
    – Kw206 is an OBDII EOBD Scan code reader that supports all 12V vehicles to enable technicians to accurately diagnose even the toughest problems, to read and delete general fault codes.
    – The HUD(Head-up-display) integrates the speedometer, engine temperature gauge, oil thermometer, boost gauge, fuel consumption meter in one, and shows these data on the windshield for convenience.
    – Kw206 can display instantaneous and average fuel consumption.
    – Kw206 supports vehicle key data alarm function (voltage, water temperature, speed, etc.)
    – There are multiple dedicated systems that can be switched freely.

    Koonwei kw206 parameter
    – Colour: Black
    – 3.5 inch TFT color screen
    – Supported languages: Chinese, English, Russian, Spanish
    – Support Agreement: Five major agreements
    – Application: 12V vehicle
    – Product size: 13 x 8.4 x 2.58 cm
    – Product weight: 300 grams

    What’s in the box
    1 x Konnwei KW206 OBDII scanner
    1 x USB cable
    1 x 16 pin connector
    1 x User manual
    1 x Colour box

    Add to cart
    Quick View
  • KONNWEI KW210 12V Car Battery Tester Auto Battery Analyzer 100 to 2000CCA Cranking Automotive Diagnostic Tool

    Original price was: R999.00.Current price is: R699.00.
    Product Description:
    KONNWEI KW210 is the newest battery tester upgraded from the old classic backlit tester in the market, aiming at check battery,health fast and accurately, as well as check the alternator working status. It’s a professional vehicle diagnostic tool for checking your battery system issues by using the graphing voltage monitoring tool, with its color screen and unique pattern design, life time free update service, the KONNWEI KW210is a perfect battery testing tool for your job and the family.

    Specification:

     

    Brand: KONNWEI

    Model Number: KW210

    Display: Color TFT LCD Screen.
    System Voltage: 12 V
    Input Voltage Range: 8V-16V
    Power Requirements: No internal batteries required, Power on when hooked up during testing
    Operating Temperatuer: 0℃-50℃.
    Storage Temperature: -20℃-70℃.(-4 to 158 ℉)
    Power: 9 to 16 V provided via vehicle
    Supported Battery type: CCA, ICE, EN, DIN, CA, BCI, MCA, SAE, GB, JIS Device
    Dimensions: 16.5cm x 6cm x 2.5cm

    Weight: 450g

     

    Feature:
    1.Fast and smooth running speed with STM32 chip set hardware.
    2.Identify battery status Good or Replace.
    3.Check Battery Capacity – Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating.
    4.Check Internal resistance value (m) .
    5.Display Life in percentage (%) .
    6.Battery Cranking Test, load test Battery Charging Test, Ripple Test.
    7.Graphing voltage real time monitoring.
    8.Test results storage and review.
    9.Print test results and battery report on PC.
    10.Life time upgrade free.

    Support Languages:
    English, Japanese, French, German, Russian, Dutch, Spanish, Portuguese, Polish, Italian.

    Application:
    Use to test a wide range of 12V batteries (Starting{SLI}, Deep Cycled and Marine) of Wet(Flooded), VRLA or Maintenance Free (MF), Sealed Maintenance Free (SMF), Absorption Glass Mat(AGM), EFB and GEL Cell.
    The major battery standards CA, CCA, BCL, MCA, JIS, SAE, EN, GB, DIN and IEC are supported.

    Measure Standard:
    CCA:100-2000.
    BCI:100-2000.
    CA:100-2000.
    MCA:100-2000.
    JIS:26A17-24SH52.
    DIN:100-1400.
    IEC:100-1400.
    EN:100-2000.
    SAE:100-2000.
    GB:100-1400.

    Package included:
    1 x KW210 Battery Tester Unit
    1 x USB Cable For Upgrade And Print
    1 x Box
    1 x User Manual

     

    Add to cart
    Quick View
  • Solar Induction Lamp LED Solar Wall Light Outdoor Lighting Motion Sensor

    Original price was: R399.00.Current price is: R199.00.

    Features:
    – Electrical charge solar powered
    – Energy Saving
    – Human induction motion sensor
    – Solar charging
    – Can detect movements from 3-5m up to 120 angle
    – Led Quantity: 30
    – Battery:3.7V:1200mah
    – Charging Time: 5-6h
    – Waterproof grade: IP65
    – Detection Distance: 120 degrees x 5m
    – Brightness: 800lmn

    What’s in the box
    1xSolar Lamp

    Add to cart
    Quick View
  • Constant Kitchen Electronic Scale (Including Delivery.)

    Original price was: R450.00.Current price is: R349.99.

    Features.

    NVTED Electronic Kitchen Scale,Digital Display Kitchen Food and Liquid Scales with Clear Mixing Bowl ,5kg/11lb x 1g/0.1oz

    • 11lb/5kg capacity with a division of 0.1oz/1g, with large LCD display, easy to read while multitasking in the kitchen.
    • An extra-large weighing platform provides ample space to weigh larger items. Also included is a removable bowl with a pour spout for efficient liquid weighing.
    • 2 Minute Automatic shut-off feature maximizes battery life while giving you time to multitask in the kitchen
    • Food scale is compact and lightweight, making for easy storage.
    • Low battery and overload indicator. Power supply: 1 X CR2032 batteries (included).

    【Product Maximum Load】 5KG /1G 【Scope of Appliances】 Kitchen 【Product Provided】 -1 Scale 5KG -1 3V CR2032 Battery 【Care & Maintenance】 1. Always use the scale on a solid and flat surface. 2. Avoid contact with acid citrus juices. 3. Clean the scale with a slightly damp cloth.

    Categories: 
    Add to cart
    Quick View
  • Infrared Foot Massager (Shipping Included)

    Original price was: R3,999.00.Current price is: R2,229.00.

    Product Description:

    1. Auto timing
    2. Wireless remote control
    3. Magnetic wave infiltrate
    4. Adoption digital technology
    5.15 levels speed adjust
    6.8 levels infrared choose
    7. Calorie auto calculation

    Add to cart
    Quick View
SKU: KW310 Category:
X

Select at least 2 products
to compare