Popular
-
NESTY MH200 Wireless Headphones & Speaker 2in1
R659.00
-
NESTY RX28 THUNDAR Wireless Speaker
R499.00
-
NESTY BM110 BOOMBOX Wireless Speaker
R4,199.00
-
NESTY BM103 GO Series Wireless Speaker
R339.00
-
NESTY MM301 ORBIT Wireless Speaker
R3,299.00
T6 Mini Jump Starter(Including Delivery)
Original price was: R1,499.00.R899.00Current price is: R899.00.
Features:
– Emergency Car Started In the fully charged state it can start the car more than 20 times
– Special ignition clamp
– Emergency start most types of vehicles
– Compact easy to carry
– Driving essential LED Emergency Lightning Excellent equipment for camping and outdoor activities
– Special durable plastic
– Shell and shock absorption design
– Imported high brightness
– LED 100m high
– Remote visible distance with a variety of lighting modes
– Flashlight
– Strobe
– SOS distress signals
– Switching is simple
– Continuous lighting for up to 120 hours
Life Cycle:
– Above 3000 times
– The Car Boot Port: 12v
– USB Port 5V 2.1/1A
– Starting Current 200A
– Peak Current 400A(3S)
– Size 165 x 75 x 30mm
– LED Life 100.000H
– LED Saving 1W
– LED Lumen 86LM
– Operating Temperature 0 – 85 Degrees
– Fully Charge Time 6 Hours
What’s in the box:
1 x Power Bank
1 x Wall Power adapter
1 x Cigarette lighter charging adapter
1 x Four-in-one mobile phone adapter cable
1 x Set of startup Clamp Wire
1 x User manual
20 in stock
Vendor Information
- Address:
- No ratings found yet!
-
Quick View
JX-116 120 ROTATION IP64 WATERPROOF SOLAR FLOODLIGHT HUMAN INDUCTION LAMP OUTDOOR LED GARDEN LAMP SPOTLIGHT CAMPING LIGHT
Original price was: R129.00.R99.00Current price is: R99.00.Add to cartProduct Description
Specification:
Solar Panel 0.55W 5.5V Li-ion Batery 1200mAh 3.7V LED Power 0.2w,5000K-5500K,12Pcs 22-24Im/Pcs Motion Angle and Distance 120° 3m High Light Delay 10 Seconds Switch OFF and AUTO Light Mode -OFF-High LightSize 124*96*48mm Feature:1.Recharged by the sunlight and uses stored power for overnight lighting.2.Over 12 hours of lighting time after one day charge.3.Weatherproof,IP64,heatproof and durable.4.Intelligent enery-saver.Package Included:1x Flood Light -
Quick View
KONNWEI KW210 12V Car Battery Tester Auto Battery Analyzer 100 to 2000CCA Cranking Automotive Diagnostic Tool
Original price was: R999.00.R699.00Current price is: R699.00.Add to cartProduct Description:
KONNWEI KW210 is the newest battery tester upgraded from the old classic backlit tester in the market, aiming at check battery,health fast and accurately, as well as check the alternator working status. It’s a professional vehicle diagnostic tool for checking your battery system issues by using the graphing voltage monitoring tool, with its color screen and unique pattern design, life time free update service, the KONNWEI KW210is a perfect battery testing tool for your job and the family.Specification:
Brand: KONNWEI
Model Number: KW210
Display: Color TFT LCD Screen.
System Voltage: 12 V
Input Voltage Range: 8V-16V
Power Requirements: No internal batteries required, Power on when hooked up during testing
Operating Temperatuer: 0℃-50℃.
Storage Temperature: -20℃-70℃.(-4 to 158 ℉)
Power: 9 to 16 V provided via vehicle
Supported Battery type: CCA, ICE, EN, DIN, CA, BCI, MCA, SAE, GB, JIS Device
Dimensions: 16.5cm x 6cm x 2.5cmWeight: 450g
Feature:
1.Fast and smooth running speed with STM32 chip set hardware.
2.Identify battery status Good or Replace.
3.Check Battery Capacity – Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating.
4.Check Internal resistance value (m) .
5.Display Life in percentage (%) .
6.Battery Cranking Test, load test Battery Charging Test, Ripple Test.
7.Graphing voltage real time monitoring.
8.Test results storage and review.
9.Print test results and battery report on PC.
10.Life time upgrade free.Support Languages:
English, Japanese, French, German, Russian, Dutch, Spanish, Portuguese, Polish, Italian.Application:
Use to test a wide range of 12V batteries (Starting{SLI}, Deep Cycled and Marine) of Wet(Flooded), VRLA or Maintenance Free (MF), Sealed Maintenance Free (SMF), Absorption Glass Mat(AGM), EFB and GEL Cell.
The major battery standards CA, CCA, BCL, MCA, JIS, SAE, EN, GB, DIN and IEC are supported.Measure Standard:
CCA:100-2000.
BCI:100-2000.
CA:100-2000.
MCA:100-2000.
JIS:26A17-24SH52.
DIN:100-1400.
IEC:100-1400.
EN:100-2000.
SAE:100-2000.
GB:100-1400.Package included:
1 x KW210 Battery Tester Unit
1 x USB Cable For Upgrade And Print
1 x Box
1 x User Manual -
Quick View
KONNWEI KW309 Universal Car Scanner Professional Automotive Code Reader Vehicle CAN Diagnostic Scan
Original price was: R499.00.R399.00Current price is: R399.00.Add to cartKW309 Code Reader, plug and play, fast scan and clear trouble codes, very easy to use, even a beginner can use this unit to read the error code. Full OBDII diagnostic scanner Function: read &erase engine fault code; view freeze frame data; viewing vehicle information etc. Convenient for you to know the real time status of your vehicle without going to car repair Shop. KW309 auto code reader can quickly read and erase all types of vehicle stored emission related trouble codes, pending codes, and show code definitions. Perfect fixed car diagnostic tool for car DIY mechanic and car owners. Portable Anti-Slip design and long diagnostic cable arrow you to perform a professional diagnostics in or out of your vehicle. Large LCD display and four logical buttons, easily operate and indicates test results directly. No need any battery, will get power from vehicle when connected. Even a beginner can easily use this unit. You may save the diagnostic data in KW309 OBD2 scanner, including trouble codes, freeze frame and live data. provides life-time free software update to fix the latest bugs or add new parameters.
Specifications: Color: Red,Black(optional) Material:Plastic Operating Temperature: 0 to 60 degrees C (32 to 140 F degrees ) Storage Temperature: -20 to 70 degrees C (-4 to 158 F degrees ) Size:20*15*4cm Weight:170g Packing List: 1*Car Tester 1*User Manual
Product type: Air Bag Scan Tools & Simulators
-
Quick View
KW206 Auto Onboard Computer Gauge and OBII Engine Scanner
R2,214.00Add to cartFeatures:
– Kw206 is an OBDII EOBD Scan code reader that supports all 12V vehicles to enable technicians to accurately diagnose even the toughest problems, to read and delete general fault codes.
– The HUD(Head-up-display) integrates the speedometer, engine temperature gauge, oil thermometer, boost gauge, fuel consumption meter in one, and shows these data on the windshield for convenience.
– Kw206 can display instantaneous and average fuel consumption.
– Kw206 supports vehicle key data alarm function (voltage, water temperature, speed, etc.)
– There are multiple dedicated systems that can be switched freely.Koonwei kw206 parameter
– Colour: Black
– 3.5 inch TFT color screen
– Supported languages: Chinese, English, Russian, Spanish
– Support Agreement: Five major agreements
– Application: 12V vehicle
– Product size: 13 x 8.4 x 2.58 cm
– Product weight: 300 gramsWhat’s in the box
1 x Konnwei KW206 OBDII scanner
1 x USB cable
1 x 16 pin connector
1 x User manual
1 x Colour box -
Quick View
2 Shocks USB Joystick (Shipping Included)
Original price was: R279.00.R169.00Current price is: R169.00.Add to cart- USB version 1.0/1.1/2.0/3.0, fully plug and play supported
- Provide 4 axis, 2 Analog and 12 buttons with vibration
- Turbo and slow motion functions
- Can be switched between digital mode and analog mode
- Built with 2 vibration engines, dual vibration inside
- Fully compatible with Windows OS, MAC OS
- Easy To Carry – Small, Light Weight Convenient To Use
What’s in the box
1 x Gamepad -
Quick View
Kitchen Rack (Including Delivery.)
Original price was: R1,100.00.R600.00Current price is: R600.00.Add to cartFeatures:
No punching-This drain rackhas designed with reinforced bottom, more stable, will not crook down with fullstorage. No punching is needed to strengthen its fitness.
Stainless Frame & Paint Process-The stainless steel layer andhigh-temperature baking paint layer give this drain rack a double protection,moisture and corrosion resistant and easy to clean.
The over sink dish rack with removable Utensil Holder, Hooks& cutting board holder saves tons of space and time by making it easier toaccess utensils and supplies, making your kitchen more clean and tidy.
Built-in non-slip sucker, tightly suck the table top, fix the rackwell avoid removing away. Strong Load Bearing-The maximum weight capacity is 176 Lbs. (about80kg).
Don’t block yoursight or hit your head-this ergonomic design breaking the traditional four-postdesign provide an easier storage space. You will not hit your head or beblocked your sight when using it.
[SIZE] W x L: 37 x 20.47inch (95 x 52cm)
The stainless steel sink dish rack can keep your dishesdrying and kitchen clean, it’s durable and space saving. The one you must havein your kitchen.
What You Get:
1x Dish Rack
1x Plate Rack
1x Detergent Basket
1x Fruit Basket
1x Chopsticks Cage
1x Cutlery/Knife Holder
1x Chopping board holder
5x Hooks
The stainless steel sink dish rack can keep your dishesdrying and kitchen clean, it’s durable and space saving. The one you must havein your kitchen.
Related products
-
Quick View
KW350 V/A /OBD2 Car Diagnostic Scanner-NG-140
Original price was: R1,625.00.R1,280.00Current price is: R1,280.00.Add to cartFeatures:
-It is a good assistant for car owners, you could test almost all systems of for VW/for Audi/for Skoda/for Seat series vehicles
– Can easily detect nearly 130 systems includes engine, ABS, Airbag, transmission, radio, climate control, instruments, immobilizer, and so on.
– Read and erase fault codes of 101 system of VAG cars(ABS, Airbag SRS, EPB Reset, Transmission…)
– 4 special functions: Oil reset service, throttle learning, Brake Pad Replacement, Battery matching
– With an additional function, the OBD2 ENGINE scanner has.
-Automatic Scanner System, easy to operateFunctions for VAG:
– Engine, Auto Transmission, ABS Brakes, Auto-Air Condition HVAC, Cent_Elect, Airbags, Steering Wheel, Instruments, and so on.
– Engine, Diesel Pump, AWD, etc.
– ABS Brakes, Susp_Elect, Chassis Control, Airbags, Steering Assist, Tire Pressure, and so on.
– AutoHVAC, Position Sensing, Steering wheel, Aux. Heat, LaneChange, Central Cony, etc.
– Immobilizer, Instruments, Cent_Elect, Navigation, CAN Gateway, Tow protection, etc.
– Data Transfer, Media Player, CtrlHeadDash, Inform_Electr, etc.Specifications:
-Display: Backlit, 128 64 pixel display with contrast adjustment
– Operating Temperature: 0 to 60C (32 to 140 F)
– Storage Temperature: -20 to 70C (-4 to 158 F)
– External Power: 8.0 to 18.0 V power provided via car batteryPackage includes:
– 1 x KW350 V/A /OBD2 Car Diagnostic Scanner-NG-140
– 1 x User manual -
Quick View
Pops A Dent Repair Kit
Original price was: R378.00.R99.00Current price is: R99.00.Add to cartKit Includes:
Unique Pulling bridge and knob.
3 different sizes of dent removal stems.
Professional glue gun.
1 x 17.5cm long, 11mm wide glue stick.
Knockdown tool.
Instruction manual.Try this economical alternative to dent repair, you will be pleasantly surprised at the results!
What’s in the box
x 1 Unique Pulling bridge and knob
x 3 Different sizes of dent removal stems
x 1 Professional glue gun
x 2 20cm glue sticks
x 1 Knockdown tool
x 1 Instruction manual -
Quick View
KONNWEI KW808 EOBD / OBDII Car Auto Diagnostic Scan Tools CAN Code Reader Scanner Auto Scan Adapter Scan Tool
Original price was: R893.00.R619.00Current price is: R619.00.Add to cart1. The KW808 OBDII/EOBD Code Reader supports all nine OBDII test modes on all OBDII EOBD compliant vehicles to enable technicians and home users to accurately diagnose even the toughest problems. Sophisticated yet easy-to-use, this hand-held scanning tool enables fast and easy access to engine based EOBD Fault codes, The CAN enabled tool gives clear, concise DTC definitions on its large back-lit LCD screen retrieves generic P0, P2 and P3 and U0 codes for engine emissions and also picks up manufacturer specific P1, P3 and U1 codes, Turns off MIL light, Stores freeze frame data for later evaluation and will also display monitor and I/M readiness status.
2. Features & Functions:
Works on all 1996 and later OBDII compliant US, European and Asian vehicles
Easily determines the cause of the Check Engine Light ( MIL)
Retrieves generic (P0, P2, P3, and U0) and manufacturer specific (P1, P3, and U1) codes
Turns off Check Engine Light (MIL), clears codes and resets monitors
Displays DTC definitions on unit screen
Views freeze frame data
Displays monitor and I/M readiness status (emissions)
Identifies pending codes
Reads live PCM datastream
Displays live O2 sensor test data
Graphs data C (1996 and newer)
Reads, stores & playbacks live sensor data
Memory/battery backup for off-vehicle data review and analysis
Multilingual menu:— English, Spanish, French,German
Performs modules present test
Retrieves vehicle information (VIN, CIN and CVN)
Supports CAN (Controller Area Network) and all other current
OBD-II protocols
Built-in OBD-II DTC lookup library
Large easy-to-read backlit LCD screen
Software upgradeable via internet
Prints data via PC -
Quick View
KONNWEI KW210 12V Car Battery Tester Auto Battery Analyzer 100 to 2000CCA Cranking Automotive Diagnostic Tool
Original price was: R999.00.R699.00Current price is: R699.00.Add to cartProduct Description:
KONNWEI KW210 is the newest battery tester upgraded from the old classic backlit tester in the market, aiming at check battery,health fast and accurately, as well as check the alternator working status. It’s a professional vehicle diagnostic tool for checking your battery system issues by using the graphing voltage monitoring tool, with its color screen and unique pattern design, life time free update service, the KONNWEI KW210is a perfect battery testing tool for your job and the family.Specification:
Brand: KONNWEI
Model Number: KW210
Display: Color TFT LCD Screen.
System Voltage: 12 V
Input Voltage Range: 8V-16V
Power Requirements: No internal batteries required, Power on when hooked up during testing
Operating Temperatuer: 0℃-50℃.
Storage Temperature: -20℃-70℃.(-4 to 158 ℉)
Power: 9 to 16 V provided via vehicle
Supported Battery type: CCA, ICE, EN, DIN, CA, BCI, MCA, SAE, GB, JIS Device
Dimensions: 16.5cm x 6cm x 2.5cmWeight: 450g
Feature:
1.Fast and smooth running speed with STM32 chip set hardware.
2.Identify battery status Good or Replace.
3.Check Battery Capacity – Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating.
4.Check Internal resistance value (m) .
5.Display Life in percentage (%) .
6.Battery Cranking Test, load test Battery Charging Test, Ripple Test.
7.Graphing voltage real time monitoring.
8.Test results storage and review.
9.Print test results and battery report on PC.
10.Life time upgrade free.Support Languages:
English, Japanese, French, German, Russian, Dutch, Spanish, Portuguese, Polish, Italian.Application:
Use to test a wide range of 12V batteries (Starting{SLI}, Deep Cycled and Marine) of Wet(Flooded), VRLA or Maintenance Free (MF), Sealed Maintenance Free (SMF), Absorption Glass Mat(AGM), EFB and GEL Cell.
The major battery standards CA, CCA, BCL, MCA, JIS, SAE, EN, GB, DIN and IEC are supported.Measure Standard:
CCA:100-2000.
BCI:100-2000.
CA:100-2000.
MCA:100-2000.
JIS:26A17-24SH52.
DIN:100-1400.
IEC:100-1400.
EN:100-2000.
SAE:100-2000.
GB:100-1400.Package included:
1 x KW210 Battery Tester Unit
1 x USB Cable For Upgrade And Print
1 x Box
1 x User Manual
Product Showcase
Reviews
There are no reviews yet.