Smart Sensor Car Wireless Charger S5 (Shipping Included)

Specification:

Brand: KONNWEI

Model Number: KW210

Display: Color TFT LCD Screen.
System Voltage: 12 V
Input Voltage Range: 8V-16V
Power Requirements: No internal batteries required, Power on when hooked up during testing
Operating Temperatuer: 0℃-50℃.
Storage Temperature: -20℃-70℃.(-4 to 158 ℉)
Power: 9 to 16 V provided via vehicle
Supported Battery type: CCA, ICE, EN, DIN, CA, BCI, MCA, SAE, GB, JIS Device
Dimensions: 16.5cm x 6cm x 2.5cm

Weight: 450g

Feature:
1.Fast and smooth running speed with STM32 chip set hardware.
2.Identify battery status Good or Replace.
3.Check Battery Capacity – Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating.
4.Check Internal resistance value (m) .
5.Display Life in percentage (%) .
6.Battery Cranking Test, load test Battery Charging Test, Ripple Test.
7.Graphing voltage real time monitoring.
8.Test results storage and review.
9.Print test results and battery report on PC.
10.Life time upgrade free.

Support Languages:
English, Japanese, French, German, Russian, Dutch, Spanish, Portuguese, Polish, Italian.

Application:
Use to test a wide range of 12V batteries (Starting{SLI}, Deep Cycled and Marine) of Wet(Flooded), VRLA or Maintenance Free (MF), Sealed Maintenance Free (SMF), Absorption Glass Mat(AGM), EFB and GEL Cell.
The major battery standards CA, CCA, BCL, MCA, JIS, SAE, EN, GB, DIN and IEC are supported.

Measure Standard:
CCA:100-2000.
BCI:100-2000.
CA:100-2000.
MCA:100-2000.
JIS:26A17-24SH52.
DIN:100-1400.
IEC:100-1400.
EN:100-2000.
SAE:100-2000.
GB:100-1400.

Package included:
1 x KW210 Battery Tester Unit
1 x USB Cable For Upgrade And Print
1 x Box
1 x User Manual

Features:
– Emergency Car Started In the fully charged state it can start the car more than 20 times
– Special ignition clamp
– Emergency start most types of vehicles
– Compact easy to carry
– Driving essential LED Emergency Lightning Excellent equipment for camping and outdoor activities
– Special durable plastic
– Shell and shock absorption design
– Imported high brightness
– LED 100m high
– Remote visible distance with a variety of lighting modes
– Flashlight
– Strobe
– SOS distress signals
– Switching is simple
– Continuous lighting for up to 120 hours

Life Cycle:
– Above 3000 times
– The Car Boot Port: 12v
– USB Port 5V 2.1/1A
– Starting Current 200A
– Peak Current 400A(3S)
– Size 165 x 75 x 30mm
– LED Life 100.000H
– LED Saving 1W
– LED Lumen 86LM
– Operating Temperature 0 – 85 Degrees
– Fully Charge Time 6 Hours

What’s in the box:

1 x Power Bank
1 x Wall Power adapter
1 x Cigarette lighter charging adapter
1 x Four-in-one mobile phone adapter cable
1 x Set of startup Clamp Wire
1 x User manual

1. The KW808 OBDII/EOBD Code Reader supports all nine OBDII test modes on all OBDII EOBD compliant vehicles to enable technicians and home users to accurately diagnose even the toughest problems. Sophisticated yet easy-to-use, this hand-held scanning tool enables fast and easy access to engine based EOBD Fault codes, The CAN enabled tool gives clear, concise DTC definitions on its large back-lit LCD screen retrieves generic P0, P2 and P3 and U0 codes for engine emissions and also picks up manufacturer specific P1, P3 and U1 codes, Turns off MIL light, Stores freeze frame data for later evaluation and will also display monitor and I/M readiness status.
2. Features & Functions:
Works on all 1996 and later OBDII compliant US, European and Asian vehicles
Easily determines the cause of the Check Engine Light ( MIL)
Retrieves generic (P0, P2, P3, and U0) and manufacturer specific (P1, P3, and U1) codes
Turns off Check Engine Light (MIL), clears codes and resets monitors
Displays DTC definitions on unit screen
Views freeze frame data
Displays monitor and I/M readiness status (emissions)
Identifies pending codes
Reads live PCM datastream
Displays live O2 sensor test data
Graphs data C (1996 and newer)
Reads, stores & playbacks live sensor data
Memory/battery backup for off-vehicle data review and analysis
Multilingual menu:— English, Spanish, French,German
Performs modules present test
Retrieves vehicle information (VIN, CIN and CVN)
Supports CAN (Controller Area Network) and all other current
OBD-II protocols
Built-in OBD-II DTC lookup library
Large easy-to-read backlit LCD screen
Software upgradeable via internet
Prints data via PC