Popular
-
NESTY MH200 Wireless Headphones & Speaker 2in1
R659.00
-
NESTY RX28 THUNDAR Wireless Speaker
R499.00
-
NESTY BM110 BOOMBOX Wireless Speaker
R4,199.00
-
NESTY BM103 GO Series Wireless Speaker
R339.00
-
NESTY MM301 ORBIT Wireless Speaker
R3,299.00
Robot Bodyguard (Including Delivery.)
Original price was: R232.00.R135.00Current price is: R135.00.
Product Features
- Convenient
- Portable
- 2 colours
- Password setting and finger print detection
- Handle on top
- Changeable Code, Electronic Sounds, Coin Slot
- Battery Powered (batteries not included)
20 in stock
Vendor Information
- Address:
- No ratings found yet!
-
Quick View
KONNWEI KW808 EOBD / OBDII Car Auto Diagnostic Scan Tools CAN Code Reader Scanner Auto Scan Adapter Scan Tool
Original price was: R893.00.R619.00Current price is: R619.00.Add to cart1. The KW808 OBDII/EOBD Code Reader supports all nine OBDII test modes on all OBDII EOBD compliant vehicles to enable technicians and home users to accurately diagnose even the toughest problems. Sophisticated yet easy-to-use, this hand-held scanning tool enables fast and easy access to engine based EOBD Fault codes, The CAN enabled tool gives clear, concise DTC definitions on its large back-lit LCD screen retrieves generic P0, P2 and P3 and U0 codes for engine emissions and also picks up manufacturer specific P1, P3 and U1 codes, Turns off MIL light, Stores freeze frame data for later evaluation and will also display monitor and I/M readiness status.
2. Features & Functions:
Works on all 1996 and later OBDII compliant US, European and Asian vehicles
Easily determines the cause of the Check Engine Light ( MIL)
Retrieves generic (P0, P2, P3, and U0) and manufacturer specific (P1, P3, and U1) codes
Turns off Check Engine Light (MIL), clears codes and resets monitors
Displays DTC definitions on unit screen
Views freeze frame data
Displays monitor and I/M readiness status (emissions)
Identifies pending codes
Reads live PCM datastream
Displays live O2 sensor test data
Graphs data C (1996 and newer)
Reads, stores & playbacks live sensor data
Memory/battery backup for off-vehicle data review and analysis
Multilingual menu:— English, Spanish, French,German
Performs modules present test
Retrieves vehicle information (VIN, CIN and CVN)
Supports CAN (Controller Area Network) and all other current
OBD-II protocols
Built-in OBD-II DTC lookup library
Large easy-to-read backlit LCD screen
Software upgradeable via internet
Prints data via PC -
Quick View
U-Grip Pro Triple Shoe Mount Video Camera Stabilizer Handle Video Grip
Original price was: R349.00.R259.00Current price is: R259.00.Add to cartFeatures:
Compact size, light weight, easy to carry
Comes with 1/4 standard screw, you can attach cameras, video comcorders, sports camera mount or phone clip on it
1/4 inch screw nut under the hand grip, you can mount it on tripods or other stabilizier
Comfortable sponge wrapping the grip, anti slip
3 cold shoe mounts on the grip, you can mount other video devices on it when shooting
A good partner for photography
Weight: 300gPackage Included:
1 x Ulanzi U-Grip Pro Stabilizer
( other accessories not included) -
Quick View
KONNWEI KW310 Professional OBD2 Scanner and KONNWEI KW350 Full System OBD2 Diagnostic Scanner
Original price was: R599.00.R399.00Current price is: R399.00.Add to cartFeatures
-Reading Codes Show the detailed description of the Diagnostic Trouble Code (DTCs)
– Erasing Codes & Reset Turns off Check Engine Light (MIL), clears codes, and resets monitors.
– Data Stream Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
– I/M Readiness Status Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
– View Freeze Frame Data Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
– Read Vehicle Information Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
– Turn off the engine warning light
– Smoke emission Check
-.Engine EPC Check
– Work on ALL 12V OBDII certified vehicles.
– Hybrid and electric vehicles are not supported.What’s in the box
1 x KW310 OBD2 Automotive Diagnostic Scanner Tool -
Quick View
Smart Sensor S5 Car Wireless Charger( Including Delivery.)
Original price was: R335.00.R199.99Current price is: R199.99.Add to cartFeatures.
Smart Sensor S5 Wireless Charger Car Mount adopts high charging efficiency, upgraded independent coil, Qi wireless fast charging and provides faster charge than most wireless car charger mounts in the market.
High quality compared with a windshield or a dashboard mount, the air vent mount is much easier for you to reach the phone in your car and causes less distraction during driving. No Tools Needed.• Qi-certified: Supports all QI enabled devices. Devices that do not support wireless charging will need to be paired with a QI compliant wireless charging receiver (not included).
• Input: 5V/2A, 9V/1.67A
• Output: Automatic identification 10W, 7.5W, and 5W
• Charging power: 110K-205K h/z
• Scratch resistant material
• Fast charge: This is one of the fastest wireless chargers on the market
• Strong and stable mount and clamp
• Air-vent mount design for much easier installation compared to windshield or dashboard mount. Absolutely no tools needed. Can easily be installed into any car
• Smart infrared sensors: Simply wave our hand or phone in front of the infrared sensor, both arms will open wide to hold our cellphones automatically
• Compatibility: Works with all Qi wireless compatible phones -
Quick View
KONNWEI KW818 EOBD / OBDII Car Auto Diagnostic Scan Tools CAN Code Reader Scanner (Only for 12V Gasoline Car)
Original price was: R1,727.00.R999.00Current price is: R999.00.Add to cartThe KONNWEI Kw818 new OBD2 / EOBD / CAN auto diagnostic scanner supports all 10 OBDII test modes on all OBDII compliant vehicles for a complete diagnosis. Featuring the unique patented One-Click I/M Readiness Key, TFT color display and built-in speaker, Real Time Battery Voltage Monitoring, the KONNWEI KW818 is truly the ultimate in power and affordability, allowing users to do their jobs faster.
Functions
1. Read engine fault codes and shows definitions.
2. Read DTCs
3. Clear DTCs
4. Read data stream
5. Turn off MIL and reset monitors
6. View freeze frame data
7. I/M readiness monitor status
8. Display O2 sensor test data
9. Read vehicle information
10. DTC lookup
11.Test data review
13. Internet upgradable
14. 2.8 inch LCD display with extra long 5.5ft cable
15. Lifetime free update software.Supported Protocols
1. ISO15765-4(CAN)
2. ISO14230-4(KWP2000)
3. ISO9141-2
4. J1850 VPW
5. J1850 PWM -
Quick View
Stockable Shoe Rack (Including Delivery.)
Original price was: R230.00.R169.00Current price is: R169.00.Add to cartFeautres.
- 30 Pair Stackable Shoe Storage Rack
- Metal Frame and Resin Siding
- Build One or Two Shoe Racks
- Adjustable Non-Slip Shelves
- Black in Colour
- Light-weight Construction
- Organise and Uncluttered Your Shoes
Related products
-
Quick View
Automatic Breast Pump- RH298( Including Delivery.)
Original price was: R1,010.00.R559.99Current price is: R559.99.Add to cartFeatures.
Automatic electric breast pump pulls milk suction nursing RH298
Breast Pump Breast for breast-feeding for your own child/a. Electric model made with silicone and PP materials and does not contain bisphenol A, won’t produce harmful substances and is resistant to high temperature. Easy to clean. Bottle made of PP, antiscollisione and resistene drops. Speed settings for suction milk from the breast. Ideal for moms workers and not needing a meal healthy and immediately ready for your own child
- Material: silicone + PP
- Size: 150 ml
- Rated Voltage: 5 V 1 A.
- Rated Power: 3,6 W.
- Rated current: 600mA
- Rated frequency: 50Hz
Product Showcase
Reviews
There are no reviews yet.