KONNWEI KW310 Professional OBD2 Scanner and KONNWEI KW350 Full System OBD2 Diagnostic Scanner

Related products

• Sale!

  wishlist

  Smart Sensor S5 Car Wireless Charger( Including Delivery.)

  R335.00 Original price was: R335.00.R199.99Current price is: R199.99.

  Features.

  Smart Sensor S5 Wireless Charger Car Mount adopts high charging efficiency, upgraded independent coil, Qi wireless fast charging and provides faster charge than most wireless car charger mounts in the market.
  High quality compared with a windshield or a dashboard mount, the air vent mount is much easier for you to reach the phone in your car and causes less distraction during driving. No Tools Needed.

  • Qi-certified: Supports all QI enabled devices. Devices that do not support wireless charging will need to be paired with a QI compliant wireless charging receiver (not included).
  • Input: 5V/2A, 9V/1.67A
  • Output: Automatic identification 10W, 7.5W, and 5W
  • Charging power: 110K-205K h/z
  • Scratch resistant material
  • Fast charge: This is one of the fastest wireless chargers on the market
  • Strong and stable mount and clamp
  • Air-vent mount design for much easier installation compared to windshield or dashboard mount. Absolutely no tools needed. Can easily be installed into any car
  • Smart infrared sensors: Simply wave our hand or phone in front of the infrared sensor, both arms will open wide to hold our cellphones automatically
  • Compatibility: Works with all Qi wireless compatible phones

  Add to cart

  Quick View
• Sale!

  wishlist

  KW350 V/A /OBD2 Car Diagnostic Scanner-NG-140

  R1,625.00 Original price was: R1,625.00.R1,280.00Current price is: R1,280.00.

  Features:
  -It is a good assistant for car owners, you could test almost all systems of for VW/for Audi/for Skoda/for Seat series vehicles
  – Can easily detect nearly 130 systems includes engine, ABS, Airbag, transmission, radio, climate control, instruments, immobilizer, and so on.
  – Read and erase fault codes of 101 system of VAG cars(ABS, Airbag SRS, EPB Reset, Transmission…)
  – 4 special functions: Oil reset service, throttle learning, Brake Pad Replacement, Battery matching
  – With an additional function, the OBD2 ENGINE scanner has.
  -Automatic Scanner System, easy to operate

  Functions for VAG:
  – Engine, Auto Transmission, ABS Brakes, Auto-Air Condition HVAC, Cent_Elect, Airbags, Steering Wheel, Instruments, and so on.
  – Engine, Diesel Pump, AWD, etc.
  – ABS Brakes, Susp_Elect, Chassis Control, Airbags, Steering Assist, Tire Pressure, and so on.
  – AutoHVAC, Position Sensing, Steering wheel, Aux. Heat, LaneChange, Central Cony, etc.
  – Immobilizer, Instruments, Cent_Elect, Navigation, CAN Gateway, Tow protection, etc.
  – Data Transfer, Media Player, CtrlHeadDash, Inform_Electr, etc.

  Specifications:
  -Display: Backlit, 128 64 pixel display with contrast adjustment
  – Operating Temperature: 0 to 60C (32 to 140 F)
  – Storage Temperature: -20 to 70C (-4 to 158 F)
  – External Power: 8.0 to 18.0 V power provided via car battery

  Package includes:
  – 1 x KW350 V/A /OBD2 Car Diagnostic Scanner-NG-140
  – 1 x User manual

  Add to cart

  Quick View
• Sale!

  wishlist

  T6 Mini Jump Starter(Including Delivery)

  R1,499.00 Original price was: R1,499.00.R899.00Current price is: R899.00.

  Features:
  – Emergency Car Started In the fully charged state it can start the car more than 20 times
  – Special ignition clamp
  – Emergency start most types of vehicles
  – Compact easy to carry
  – Driving essential LED Emergency Lightning Excellent equipment for camping and outdoor activities
  – Special durable plastic
  – Shell and shock absorption design
  – Imported high brightness
  – LED 100m high
  – Remote visible distance with a variety of lighting modes
  – Flashlight
  – Strobe
  – SOS distress signals
  – Switching is simple
  – Continuous lighting for up to 120 hours

  Life Cycle:
  – Above 3000 times
  – The Car Boot Port: 12v
  – USB Port 5V 2.1/1A
  – Starting Current 200A
  – Peak Current 400A(3S)
  – Size 165 x 75 x 30mm
  – LED Life 100.000H
  – LED Saving 1W
  – LED Lumen 86LM
  – Operating Temperature 0 – 85 Degrees
  – Fully Charge Time 6 Hours

  What’s in the box:

  1 x Power Bank
  1 x Wall Power adapter
  1 x Cigarette lighter charging adapter
  1 x Four-in-one mobile phone adapter cable
  1 x Set of startup Clamp Wire
  1 x User manual

  Add to cart

  Quick View
• Sale!

  wishlist

  KONNWEI KW210 12V Car Battery Tester Auto Battery Analyzer 100 to 2000CCA Cranking Automotive Diagnostic Tool

  R999.00 Original price was: R999.00.R699.00Current price is: R699.00.

  Product Description:
  KONNWEI KW210 is the newest battery tester upgraded from the old classic backlit tester in the market, aiming at check battery,health fast and accurately, as well as check the alternator working status. It’s a professional vehicle diagnostic tool for checking your battery system issues by using the graphing voltage monitoring tool, with its color screen and unique pattern design, life time free update service, the KONNWEI KW210is a perfect battery testing tool for your job and the family.

  Specification:

   

  Brand: KONNWEI

  Model Number: KW210

  Display: Color TFT LCD Screen.
  System Voltage: 12 V
  Input Voltage Range: 8V-16V
  Power Requirements: No internal batteries required, Power on when hooked up during testing
  Operating Temperatuer: 0℃-50℃.
  Storage Temperature: -20℃-70℃.(-4 to 158 ℉)
  Power: 9 to 16 V provided via vehicle
  Supported Battery type: CCA, ICE, EN, DIN, CA, BCI, MCA, SAE, GB, JIS Device
  Dimensions: 16.5cm x 6cm x 2.5cm

  Weight: 450g

   

  Feature:
  1.Fast and smooth running speed with STM32 chip set hardware.
  2.Identify battery status Good or Replace.
  3.Check Battery Capacity – Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating.
  4.Check Internal resistance value (m) .
  5.Display Life in percentage (%) .
  6.Battery Cranking Test, load test Battery Charging Test, Ripple Test.
  7.Graphing voltage real time monitoring.
  8.Test results storage and review.
  9.Print test results and battery report on PC.
  10.Life time upgrade free.

  Support Languages:
  English, Japanese, French, German, Russian, Dutch, Spanish, Portuguese, Polish, Italian.

  Application:
  Use to test a wide range of 12V batteries (Starting{SLI}, Deep Cycled and Marine) of Wet(Flooded), VRLA or Maintenance Free (MF), Sealed Maintenance Free (SMF), Absorption Glass Mat(AGM), EFB and GEL Cell.
  The major battery standards CA, CCA, BCL, MCA, JIS, SAE, EN, GB, DIN and IEC are supported.

  Measure Standard:
  CCA:100-2000.
  BCI:100-2000.
  CA:100-2000.
  MCA:100-2000.
  JIS:26A17-24SH52.
  DIN:100-1400.
  IEC:100-1400.
  EN:100-2000.
  SAE:100-2000.
  GB:100-1400.

  Package included:
  1 x KW210 Battery Tester Unit
  1 x USB Cable For Upgrade And Print
  1 x Box
  1 x User Manual

   

  Add to cart

  Quick View