IRON MAN BT SPEAKER MK-46

Specification:

Brand: KONNWEI

Model Number: KW210

Display: Color TFT LCD Screen.
System Voltage: 12 V
Input Voltage Range: 8V-16V
Power Requirements: No internal batteries required, Power on when hooked up during testing
Operating Temperatuer: 0℃-50℃.
Storage Temperature: -20℃-70℃.(-4 to 158 ℉)
Power: 9 to 16 V provided via vehicle
Supported Battery type: CCA, ICE, EN, DIN, CA, BCI, MCA, SAE, GB, JIS Device
Dimensions: 16.5cm x 6cm x 2.5cm

Weight: 450g

Feature:
1.Fast and smooth running speed with STM32 chip set hardware.
2.Identify battery status Good or Replace.
3.Check Battery Capacity – Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating.
4.Check Internal resistance value (m) .
5.Display Life in percentage (%) .
6.Battery Cranking Test, load test Battery Charging Test, Ripple Test.
7.Graphing voltage real time monitoring.
8.Test results storage and review.
9.Print test results and battery report on PC.
10.Life time upgrade free.

Support Languages:
English, Japanese, French, German, Russian, Dutch, Spanish, Portuguese, Polish, Italian.

Application:
Use to test a wide range of 12V batteries (Starting{SLI}, Deep Cycled and Marine) of Wet(Flooded), VRLA or Maintenance Free (MF), Sealed Maintenance Free (SMF), Absorption Glass Mat(AGM), EFB and GEL Cell.
The major battery standards CA, CCA, BCL, MCA, JIS, SAE, EN, GB, DIN and IEC are supported.

Measure Standard:
CCA:100-2000.
BCI:100-2000.
CA:100-2000.
MCA:100-2000.
JIS:26A17-24SH52.
DIN:100-1400.
IEC:100-1400.
EN:100-2000.
SAE:100-2000.
GB:100-1400.

Package included:
1 x KW210 Battery Tester Unit
1 x USB Cable For Upgrade And Print
1 x Box
1 x User Manual

Features.

Smart Sensor S5 Wireless Charger Car Mount adopts high charging efficiency, upgraded independent coil, Qi wireless fast charging and provides faster charge than most wireless car charger mounts in the market.
High quality compared with a windshield or a dashboard mount, the air vent mount is much easier for you to reach the phone in your car and causes less distraction during driving. No Tools Needed.

• Qi-certified: Supports all QI enabled devices. Devices that do not support wireless charging will need to be paired with a QI compliant wireless charging receiver (not included).
• Input: 5V/2A, 9V/1.67A
• Output: Automatic identification 10W, 7.5W, and 5W
• Charging power: 110K-205K h/z
• Scratch resistant material
• Fast charge: This is one of the fastest wireless chargers on the market
• Strong and stable mount and clamp
• Air-vent mount design for much easier installation compared to windshield or dashboard mount. Absolutely no tools needed. Can easily be installed into any car
• Smart infrared sensors: Simply wave our hand or phone in front of the infrared sensor, both arms will open wide to hold our cellphones automatically
• Compatibility: Works with all Qi wireless compatible phones