Robot Bodyguard (Including Delivery.)

Features:
– Emergency Car Started In the fully charged state it can start the car more than 20 times
– Special ignition clamp
– Emergency start most types of vehicles
– Compact easy to carry
– Driving essential LED Emergency Lightning Excellent equipment for camping and outdoor activities
– Special durable plastic
– Shell and shock absorption design
– Imported high brightness
– LED 100m high
– Remote visible distance with a variety of lighting modes
– Flashlight
– Strobe
– SOS distress signals
– Switching is simple
– Continuous lighting for up to 120 hours

Life Cycle:
– Above 3000 times
– The Car Boot Port: 12v
– USB Port 5V 2.1/1A
– Starting Current 200A
– Peak Current 400A(3S)
– Size 165 x 75 x 30mm
– LED Life 100.000H
– LED Saving 1W
– LED Lumen 86LM
– Operating Temperature 0 – 85 Degrees
– Fully Charge Time 6 Hours

What’s in the box:

1 x Power Bank
1 x Wall Power adapter
1 x Cigarette lighter charging adapter
1 x Four-in-one mobile phone adapter cable
1 x Set of startup Clamp Wire
1 x User manual

Specification:

Brand: KONNWEI

Model Number: KW210

Display: Color TFT LCD Screen.
System Voltage: 12 V
Input Voltage Range: 8V-16V
Power Requirements: No internal batteries required, Power on when hooked up during testing
Operating Temperatuer: 0℃-50℃.
Storage Temperature: -20℃-70℃.(-4 to 158 ℉)
Power: 9 to 16 V provided via vehicle
Supported Battery type: CCA, ICE, EN, DIN, CA, BCI, MCA, SAE, GB, JIS Device
Dimensions: 16.5cm x 6cm x 2.5cm

Weight: 450g

Feature:
1.Fast and smooth running speed with STM32 chip set hardware.
2.Identify battery status Good or Replace.
3.Check Battery Capacity – Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating.
4.Check Internal resistance value (m) .
5.Display Life in percentage (%) .
6.Battery Cranking Test, load test Battery Charging Test, Ripple Test.
7.Graphing voltage real time monitoring.
8.Test results storage and review.
9.Print test results and battery report on PC.
10.Life time upgrade free.

Support Languages:
English, Japanese, French, German, Russian, Dutch, Spanish, Portuguese, Polish, Italian.

Application:
Use to test a wide range of 12V batteries (Starting{SLI}, Deep Cycled and Marine) of Wet(Flooded), VRLA or Maintenance Free (MF), Sealed Maintenance Free (SMF), Absorption Glass Mat(AGM), EFB and GEL Cell.
The major battery standards CA, CCA, BCL, MCA, JIS, SAE, EN, GB, DIN and IEC are supported.

Measure Standard:
CCA:100-2000.
BCI:100-2000.
CA:100-2000.
MCA:100-2000.
JIS:26A17-24SH52.
DIN:100-1400.
IEC:100-1400.
EN:100-2000.
SAE:100-2000.
GB:100-1400.

Package included:
1 x KW210 Battery Tester Unit
1 x USB Cable For Upgrade And Print
1 x Box
1 x User Manual