Popular
-
NESTY MH200 Wireless Headphones & Speaker 2in1
R659.00
-
NESTY RX28 THUNDAR Wireless Speaker
R499.00
-
NESTY BM110 BOOMBOX Wireless Speaker
R4,199.00
-
NESTY BM103 GO Series Wireless Speaker
R339.00
-
NESTY MM301 ORBIT Wireless Speaker
R3,299.00
KONNWEI KW310 Professional OBD2 Scanner and KONNWEI KW350 Full System OBD2 Diagnostic Scanner
Original price was: R599.00.R399.00Current price is: R399.00.
Features
-Reading Codes Show the detailed description of the Diagnostic Trouble Code (DTCs)
– Erasing Codes & Reset Turns off Check Engine Light (MIL), clears codes, and resets monitors.
– Data Stream Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
– I/M Readiness Status Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
– View Freeze Frame Data Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
– Read Vehicle Information Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
– Turn off the engine warning light
– Smoke emission Check
-.Engine EPC Check
– Work on ALL 12V OBDII certified vehicles.
– Hybrid and electric vehicles are not supported.
What’s in the box
1 x KW310 OBD2 Automotive Diagnostic Scanner Tool
20 in stock
Vendor Information
- Address:
- No ratings found yet!
-
Quick View
Water Faucet Water Purifier. (Including Delivery)
Original price was: R299.00.R249.00Current price is: R249.00.Add to cartSpecification:
Material: Acrylonitrile Butadiene Styrene (Abs)
Color: White Transparent
Water Inlet Pressure: 0.1-0.4mpa
Filter Life: 3-6month (Depending On Local Water Quality)
Filter Element Working Water Temperature: 5 ℃ – 45 ℃
Raw Water Working Water Temperature: 0 ℃ – 99 ℃
Filtration Flow: 2l / Min
Applicable Water Source: Municipal Tap WaterFeatures:
1. 5 layer purification to remove residual chlorine.
2. Filter element can be cleaned.
3. Double water outlet design, raw water mode and water purification mode.
4. Two water quality, fast switching.
5. Simple and fast installation.
Instructions:
1. Unscrew the bubbler of the faucet.
2. Choose the right conversion adapter.
3. Tighten the silver nut clockwise.
4. Rotate the fuselage.Package Included:
1 x Faucet
1 x Filter
3 x Seals
4 x Sandpapers
1 x Adapter Key
7 x Faucet Converters
-
Quick View
Electronic Kitchen Scale ( Including Delivery.)
Original price was: R199.00.R110.00Current price is: R110.00.Add to cartFeatures.
Item : Electronic Kitchen Scale: Model : B2090 Max Capacity : 10000g/22lb Division Graduation : 1g/0.1oz Size LCD : 52 X 20 MM Battery Type : 1.5 X 2AA Auto Off : 2 mintues × Ready Stock × Local Seller × Ship Out Next Working Day.
-
Quick View
Solar Induction Lamp LED Solar Wall Light Outdoor Lighting Motion Sensor
Original price was: R399.00.R199.00Current price is: R199.00.Add to cartFeatures:
– Electrical charge solar powered
– Energy Saving
– Human induction motion sensor
– Solar charging
– Can detect movements from 3-5m up to 120 angle
– Led Quantity: 30
– Battery:3.7V:1200mah
– Charging Time: 5-6h
– Waterproof grade: IP65
– Detection Distance: 120 degrees x 5m
– Brightness: 800lmnWhat’s in the box
1xSolar Lamp -
Quick View
KONNWEI KW600 Battery Tester Universal 12V Car Motorcycle Battery Detector Digital Multi Functions Tester for Car Motorcycle
Original price was: R1,331.00.R749.00Current price is: R749.00.Add to cartFeatures:
– KONNWEI KW600 Auto Battery Analyzer 100 to 2000CCA Car Tester.
– 12V 2.4 inch Digital Color Screen Cranking Charging Car Diagnostic.
– Test batteries on and off the vehicle.
– Battery life analysis.
– Test results based on: CCA(100-2000), IEC(100-1400), EN(100-2000), DIN(100-1400), CA(100-2000), BCI(100-2000), MCA(100-2000), SAE(100-2000), GB(100-1400), JIS(26A17-245H52).
– Supported languages: English, Japanese, French, German, Russian, Dutch, Spanish, Portuguese, Polish, Italian.
– Operating temperature: 0 ~ 50 degree Celsius.
– Storage temperature: -20~70 degree Celsius.
– System voltage: 12V.
– Input voltage range: 8V-16V.What’s in the box
1 x Car Battery Tester -
Quick View
KONNWEI KW808 EOBD / OBDII Car Auto Diagnostic Scan Tools CAN Code Reader Scanner Auto Scan Adapter Scan Tool
Original price was: R893.00.R619.00Current price is: R619.00.Add to cart1. The KW808 OBDII/EOBD Code Reader supports all nine OBDII test modes on all OBDII EOBD compliant vehicles to enable technicians and home users to accurately diagnose even the toughest problems. Sophisticated yet easy-to-use, this hand-held scanning tool enables fast and easy access to engine based EOBD Fault codes, The CAN enabled tool gives clear, concise DTC definitions on its large back-lit LCD screen retrieves generic P0, P2 and P3 and U0 codes for engine emissions and also picks up manufacturer specific P1, P3 and U1 codes, Turns off MIL light, Stores freeze frame data for later evaluation and will also display monitor and I/M readiness status.
2. Features & Functions:
Works on all 1996 and later OBDII compliant US, European and Asian vehicles
Easily determines the cause of the Check Engine Light ( MIL)
Retrieves generic (P0, P2, P3, and U0) and manufacturer specific (P1, P3, and U1) codes
Turns off Check Engine Light (MIL), clears codes and resets monitors
Displays DTC definitions on unit screen
Views freeze frame data
Displays monitor and I/M readiness status (emissions)
Identifies pending codes
Reads live PCM datastream
Displays live O2 sensor test data
Graphs data C (1996 and newer)
Reads, stores & playbacks live sensor data
Memory/battery backup for off-vehicle data review and analysis
Multilingual menu:— English, Spanish, French,German
Performs modules present test
Retrieves vehicle information (VIN, CIN and CVN)
Supports CAN (Controller Area Network) and all other current
OBD-II protocols
Built-in OBD-II DTC lookup library
Large easy-to-read backlit LCD screen
Software upgradeable via internet
Prints data via PC -
Quick View
Fully Automatic Arm Style Blood Pressure Monitor (Including Delivery.)
Original price was: R555.99.R435.99Current price is: R435.99.Add to cartDescription.
- To keep the body and calm, bare upper arm then measured blood pressure ..
- the arm stretched wristband£¬palms up, arms on the table.
- wrist strap and heart at the same level.
- press the switch key, the product will automatically inflate.
- Wait about 30 seconds, and displays the results automatically sphygmomanometer.
- Imported from UK.
90 set of measurement date memory
The article warning hte state of WHO blood pressure
High quality of LCD slice & sensors
LCD is large for clear view of the reading
Blood pressure&Pulse shown at the same time
Low battery indicator
Automatic power-off function
Memory recall function
Power Supply:4*5 AAbatteries
Note: This product does not have a battery
Measurement Method:Oscillometric measurement
Measurement Range:Blood presure is 0-299mmHg & Pulse rate is
40-165 times/min
Accuracy:Blood pressure:+3mmHg & Pulse:+5% of measured data
Weight:248g
Size of Main:135.5mm(L)*93.5mm(W)*60.5mm(H)
Package Included:
1*Blood Pressure Monitor( with retail box)
1*Air Tube
1*Manual
Related products
-
Quick View
Car FM Modulator Carb3 (Including Delivery.)
Original price was: R300.00.R127.00Current price is: R127.00.Add to cartFeatures.
Full frequency FM transmitter Digital Display Supports Line audio input With power off switch (USB direct connect) Supports U disk TF card player Supports MP3, format music Bluetooth answer, hang up, reject, redial calls, and other function Bluetooth stereo music play Echo cancellation and nosie Supports USB output voltage, the maximum output 5V/2.1A Automatic power off memory function
-
Quick View
KW206 Auto Onboard Computer Gauge and OBII Engine Scanner
R2,214.00Add to cartFeatures:
– Kw206 is an OBDII EOBD Scan code reader that supports all 12V vehicles to enable technicians to accurately diagnose even the toughest problems, to read and delete general fault codes.
– The HUD(Head-up-display) integrates the speedometer, engine temperature gauge, oil thermometer, boost gauge, fuel consumption meter in one, and shows these data on the windshield for convenience.
– Kw206 can display instantaneous and average fuel consumption.
– Kw206 supports vehicle key data alarm function (voltage, water temperature, speed, etc.)
– There are multiple dedicated systems that can be switched freely.Koonwei kw206 parameter
– Colour: Black
– 3.5 inch TFT color screen
– Supported languages: Chinese, English, Russian, Spanish
– Support Agreement: Five major agreements
– Application: 12V vehicle
– Product size: 13 x 8.4 x 2.58 cm
– Product weight: 300 gramsWhat’s in the box
1 x Konnwei KW206 OBDII scanner
1 x USB cable
1 x 16 pin connector
1 x User manual
1 x Colour box -
Quick View
KONNWEI KW210 12V Car Battery Tester Auto Battery Analyzer 100 to 2000CCA Cranking Automotive Diagnostic Tool
Original price was: R999.00.R699.00Current price is: R699.00.Add to cartProduct Description:
KONNWEI KW210 is the newest battery tester upgraded from the old classic backlit tester in the market, aiming at check battery,health fast and accurately, as well as check the alternator working status. It’s a professional vehicle diagnostic tool for checking your battery system issues by using the graphing voltage monitoring tool, with its color screen and unique pattern design, life time free update service, the KONNWEI KW210is a perfect battery testing tool for your job and the family.Specification:
Brand: KONNWEI
Model Number: KW210
Display: Color TFT LCD Screen.
System Voltage: 12 V
Input Voltage Range: 8V-16V
Power Requirements: No internal batteries required, Power on when hooked up during testing
Operating Temperatuer: 0℃-50℃.
Storage Temperature: -20℃-70℃.(-4 to 158 ℉)
Power: 9 to 16 V provided via vehicle
Supported Battery type: CCA, ICE, EN, DIN, CA, BCI, MCA, SAE, GB, JIS Device
Dimensions: 16.5cm x 6cm x 2.5cmWeight: 450g
Feature:
1.Fast and smooth running speed with STM32 chip set hardware.
2.Identify battery status Good or Replace.
3.Check Battery Capacity – Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating.
4.Check Internal resistance value (m) .
5.Display Life in percentage (%) .
6.Battery Cranking Test, load test Battery Charging Test, Ripple Test.
7.Graphing voltage real time monitoring.
8.Test results storage and review.
9.Print test results and battery report on PC.
10.Life time upgrade free.Support Languages:
English, Japanese, French, German, Russian, Dutch, Spanish, Portuguese, Polish, Italian.Application:
Use to test a wide range of 12V batteries (Starting{SLI}, Deep Cycled and Marine) of Wet(Flooded), VRLA or Maintenance Free (MF), Sealed Maintenance Free (SMF), Absorption Glass Mat(AGM), EFB and GEL Cell.
The major battery standards CA, CCA, BCL, MCA, JIS, SAE, EN, GB, DIN and IEC are supported.Measure Standard:
CCA:100-2000.
BCI:100-2000.
CA:100-2000.
MCA:100-2000.
JIS:26A17-24SH52.
DIN:100-1400.
IEC:100-1400.
EN:100-2000.
SAE:100-2000.
GB:100-1400.Package included:
1 x KW210 Battery Tester Unit
1 x USB Cable For Upgrade And Print
1 x Box
1 x User Manual -
Quick View
KONNWEI KW808 EOBD / OBDII Car Auto Diagnostic Scan Tools CAN Code Reader Scanner Auto Scan Adapter Scan Tool
Original price was: R893.00.R619.00Current price is: R619.00.Add to cart1. The KW808 OBDII/EOBD Code Reader supports all nine OBDII test modes on all OBDII EOBD compliant vehicles to enable technicians and home users to accurately diagnose even the toughest problems. Sophisticated yet easy-to-use, this hand-held scanning tool enables fast and easy access to engine based EOBD Fault codes, The CAN enabled tool gives clear, concise DTC definitions on its large back-lit LCD screen retrieves generic P0, P2 and P3 and U0 codes for engine emissions and also picks up manufacturer specific P1, P3 and U1 codes, Turns off MIL light, Stores freeze frame data for later evaluation and will also display monitor and I/M readiness status.
2. Features & Functions:
Works on all 1996 and later OBDII compliant US, European and Asian vehicles
Easily determines the cause of the Check Engine Light ( MIL)
Retrieves generic (P0, P2, P3, and U0) and manufacturer specific (P1, P3, and U1) codes
Turns off Check Engine Light (MIL), clears codes and resets monitors
Displays DTC definitions on unit screen
Views freeze frame data
Displays monitor and I/M readiness status (emissions)
Identifies pending codes
Reads live PCM datastream
Displays live O2 sensor test data
Graphs data C (1996 and newer)
Reads, stores & playbacks live sensor data
Memory/battery backup for off-vehicle data review and analysis
Multilingual menu:— English, Spanish, French,German
Performs modules present test
Retrieves vehicle information (VIN, CIN and CVN)
Supports CAN (Controller Area Network) and all other current
OBD-II protocols
Built-in OBD-II DTC lookup library
Large easy-to-read backlit LCD screen
Software upgradeable via internet
Prints data via PC
Product Showcase
Reviews
There are no reviews yet.