IRON MAN BT SPEAKER MK-46

Specification:

Brand: KONNWEI

Model Number: KW210

Display: Color TFT LCD Screen.
System Voltage: 12 V
Input Voltage Range: 8V-16V
Power Requirements: No internal batteries required, Power on when hooked up during testing
Operating Temperatuer: 0℃-50℃.
Storage Temperature: -20℃-70℃.(-4 to 158 ℉)
Power: 9 to 16 V provided via vehicle
Supported Battery type: CCA, ICE, EN, DIN, CA, BCI, MCA, SAE, GB, JIS Device
Dimensions: 16.5cm x 6cm x 2.5cm

Weight: 450g

Feature:
1.Fast and smooth running speed with STM32 chip set hardware.
2.Identify battery status Good or Replace.
3.Check Battery Capacity – Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating.
4.Check Internal resistance value (m) .
5.Display Life in percentage (%) .
6.Battery Cranking Test, load test Battery Charging Test, Ripple Test.
7.Graphing voltage real time monitoring.
8.Test results storage and review.
9.Print test results and battery report on PC.
10.Life time upgrade free.

Support Languages:
English, Japanese, French, German, Russian, Dutch, Spanish, Portuguese, Polish, Italian.

Application:
Use to test a wide range of 12V batteries (Starting{SLI}, Deep Cycled and Marine) of Wet(Flooded), VRLA or Maintenance Free (MF), Sealed Maintenance Free (SMF), Absorption Glass Mat(AGM), EFB and GEL Cell.
The major battery standards CA, CCA, BCL, MCA, JIS, SAE, EN, GB, DIN and IEC are supported.

Measure Standard:
CCA:100-2000.
BCI:100-2000.
CA:100-2000.
MCA:100-2000.
JIS:26A17-24SH52.
DIN:100-1400.
IEC:100-1400.
EN:100-2000.
SAE:100-2000.
GB:100-1400.

Package included:
1 x KW210 Battery Tester Unit
1 x USB Cable For Upgrade And Print
1 x Box
1 x User Manual

The KONNWEI Kw818 new OBD2 / EOBD / CAN auto diagnostic scanner supports all 10 OBDII test modes on all OBDII compliant vehicles for a complete diagnosis. Featuring the unique patented One-Click I/M Readiness Key, TFT color display and built-in speaker, Real Time Battery Voltage Monitoring, the KONNWEI KW818 is truly the ultimate in power and affordability, allowing users to do their jobs faster.

Functions
1. Read engine fault codes and shows definitions.
2. Read DTCs
3. Clear DTCs
4. Read data stream
5. Turn off MIL and reset monitors
6. View freeze frame data
7. I/M readiness monitor status
8. Display O2 sensor test data
9. Read vehicle information
10. DTC lookup
11.Test data review
13. Internet upgradable
14. 2.8 inch LCD display with extra long 5.5ft cable
15. Lifetime free update software.

Supported Protocols
1. ISO15765-4(CAN)
2. ISO14230-4(KWP2000)
3. ISO9141-2
4. J1850 VPW
5. J1850 PWM

Features.

Smart Sensor S5 Wireless Charger Car Mount adopts high charging efficiency, upgraded independent coil, Qi wireless fast charging and provides faster charge than most wireless car charger mounts in the market.
High quality compared with a windshield or a dashboard mount, the air vent mount is much easier for you to reach the phone in your car and causes less distraction during driving. No Tools Needed.

• Qi-certified: Supports all QI enabled devices. Devices that do not support wireless charging will need to be paired with a QI compliant wireless charging receiver (not included).
• Input: 5V/2A, 9V/1.67A
• Output: Automatic identification 10W, 7.5W, and 5W
• Charging power: 110K-205K h/z
• Scratch resistant material
• Fast charge: This is one of the fastest wireless chargers on the market
• Strong and stable mount and clamp
• Air-vent mount design for much easier installation compared to windshield or dashboard mount. Absolutely no tools needed. Can easily be installed into any car
• Smart infrared sensors: Simply wave our hand or phone in front of the infrared sensor, both arms will open wide to hold our cellphones automatically
• Compatibility: Works with all Qi wireless compatible phones